Kitchen Layout Checker
Will your kitchen work, not just fit? Enter your aisle widths, landing space and work-triangle distances and see each one rated against the NKBA Kitchen Planning Guidelines.
- Checks met—
- Triangle total—
- Work aisle—
- Weakest check—
Drag to turn · scroll or pinch to zoom · green = meets the guideline, amber = tight, red = short
How this kitchen layout checker works
Almost every number here is a design guideline from the National Kitchen & Bath Association (NKBA), not building code. The International Residential Code only says a dwelling needs a kitchen area with a sink (R306.1); it sets no aisle widths, landing areas or work triangle. So there is no "code minimum" column below, only the NKBA target.
The "tight" and "fail" cutoffs are this tool's own tolerances, so you can tell a near miss from a real problem. The NKBA publishes the guidelines in several editions and the wording on landing areas differs between them, so confirm the numbers with your designer. A kitchen can miss one or two and still work well. For wheelchair-accessible kitchens use the ADA numbers instead (for example 40 in between opposing counters in a pass-through kitchen, 2010 ADA Standards 804.2.1).
One-wall kitchens often cannot meet the 4 ft minimum leg because everything sits on one line; the triangle is still checked, but treat it as a rule of thumb there. The diagram is drawn to scale from your three leg lengths.
NKBA guideline table pass, tight and fail cutoffs
| Measurement | NKBA guideline | Tight if | Fail if |
|---|---|---|---|
| Work aisle, one cook | 42 in or more | 36–41.9 in | under 36 in |
| Work aisle, two or more cooks | 48 in or more | 42–47.9 in | under 42 in |
| Walkway | 36 in or more | 32–35.9 in | under 32 in |
| Island clearances | Work side: same as work aisle. Other side: walkway, 36 in | as above | as above |
| Landing beside sink | 24 in one side, 18 in the other | within 6 in | more than 6 in short |
| Landing beside cooktop | 15 in one side, 12 in the other | within 3 in | more than 3 in short |
| Landing at refrigerator | 15 in | 12–14.9 in | under 12 in |
| Dishwasher to sink | within 36 in | 36–48 in | over 48 in |
| Each triangle leg | 4 ft to 9 ft | within 1 ft outside that range | more than 1 ft outside |
| Triangle total | 26 ft or less | 26–28 ft | over 28 ft |
A planning check, not a plan review. Your designer, contractor and building department decide what applies to your home.
Estimates only — not engineering, legal or code advice. Check requirements with your local building department and a licensed professional before you build.
Common questions
How wide should a kitchen aisle be?
The NKBA recommends a work aisle of at least 42 inches for one cook and at least 48 inches when two or more cooks work together. A work aisle is the space between counters, appliances or an island where you actually cook. Walkways that are not part of the work area should be at least 36 inches wide.
What is the kitchen work triangle?
It is the straight-line path between the sink, the cooktop or range, and the refrigerator. The NKBA guideline is that each leg is between 4 and 9 feet and the three legs add up to no more than 26 feet. With this tool's defaults (5, 6 and 5 feet) the total is 16 feet, which passes.
How much countertop landing area do I need?
The NKBA guidelines call for about 24 inches of counter on one side of the sink and 18 inches on the other, 15 inches on one side of the cooktop and 12 inches on the other, and 15 inches of landing space beside the refrigerator (or across from it). The guideline wording and edition can differ slightly, so confirm with your designer.
How close should the dishwasher be to the sink?
The NKBA recommends that the nearest edge of the dishwasher is within 36 inches of the edge of the cleanup sink. Closer is better for rinsing and loading dishes.
Does the building code set kitchen clearances?
Mostly no. The International Residential Code only requires that every dwelling have a kitchen area with a sink (R306.1). Aisle widths, landing areas and the work triangle are design guidelines from the NKBA, not code. Accessible kitchens follow the ADA, which calls for 40 inches between opposing counters in a pass-through kitchen (2010 ADA Standards, 804.2.1).
What if my kitchen is too small to meet every guideline?
Many real kitchens miss one or two. A result marked tight means the number is a bit below the guideline but usable. The guidelines are targets for comfort and safety, so a small kitchen can still work if you plan around the weak spot, for example by choosing a smaller range or moving the fridge.